 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| LH1510AAB/ AABTR/ AT Vishay Semiconductors 1 Form A Solid State Relay Features * * * * * * * * * Isolation Test Voltage 5300 VRMS Current-limit Protection Built-in High-reliability Monolithic output die Low Power Consumption Clean, Bounce-free Switching High Surge Capability Surface Mountable Lead-free component Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC DIP SMD S 6 DC 5 S' 4 S S' i179001 1 2 3 e3 Peripherals - Transducer Driver Pb Pb-free Agency Approvals * UL1577, File No. E52744 System Code H or J, Double Protection * CSA - Certification 093751 * BSI/BABT Cert. No. 7980 * DIN EN 60747-5-2 (VDE0884) DIN EN 60747-5-5 pending * FIMKO Approval Description The LH1510 is a SPST normally open switch (1 Form A) that can replace electromechanical relays in many applications. The relay is constructed using a GaAlAs LED for actuation control and an integrated monolithic die for the switch output. The die, fabricated in a highvoltage dielectrically isolated technology, is comprised of a photodiode array, switch control circuity, and MOSFET switches. In addition, the relay employs current-limiting circuity enabling it to pass FCC 68.302 and other regulatory voltage surge requirements when overvoltage protection is provided. The LH1510 is the only relay in the family that provides current limiting for unidirectional dc applications. Applications General Telecom Switching - On/off-hook - Ring Relay/ Dial Pulse - Ground Start/ Fault Protection Instrumentation - Automatic Tuning/Balancing - Flying Capacitor - Analog Multiplex Industrial Controls - Triac Predrivers - Output Modules Order Information Part LH1510AAB LH1510AABTR LH1510AT Remarks Tubes, SMD-6 Tape and Reel, SMD-6 Tubes, DIP-6 Document Number 83810 Rev. 1.3, 26-Oct-04 www.vishay.com 1 LH1510AAB/ AABTR/ AT Vishay Semiconductors Absolute Maximum Ratings, Tamb = 25 C Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute Maximum Ratings for extended periods of time can adversely affect reliability. SSR Parameter LED continuous forward current LED reverse voltage DC or peak AC load voltage Continuous DC load current bidirectional operation Continuous DC load current unidirectional operation Peak load current (single shot) Ambient temperature range Storage temperature range Pin soldering temperature Input/output isolation voltage Output power dissipation (continuous) 1) Test condition IR 10 A IL 50 A Symbol IF VR VL IL IL Value 50 8.0 200 200 350 1) Unit mA V V mA mA t = 100 ms IP Tamb Tstg - 40 to + 85 - 40 to + 150 260 5300 550 C C C VRMS mW t = 10 s max Tsld VISO Pdiss Refer to Current Limit Performance Application Note 58 for a discussion on relay operation during transient currents. Electrical Characteristics, Tamb = 25 C Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. Input Parameter LED forward current, switch turn-on LED forward current, switch turn-off LED forward voltage Test condition IL = 100 mA, t = 10 ms VL = 150 V IF = 10 mA Symbol IFon IFoff VF 0.2 1.15 Min Typ. 0.95 0.85 1.27 1.45 Max 2.0 Unit mA mA V Output Parameter ON-resistance ac/dc: Pin 4() to 6 () ON-resistance dc: Pin 4, 6 (+) to 5 () Off-resistance Current limit ac/dc: Pin 4 () to 6 () Current limit dc: Pin 4, 6 (+) to 5 () Off-state leakage current Test condition IF = 5.0 mA, IL = 50 mA IF = 5.0 mA, IL = 100 mA IF = 0 mA, VL = 100 V IF = 5.0 mA, VL = 5.0 V, t = 5.0 ms IF = 5.0 mA, VL = 4.0 V, t = 5.0 ms IF = 0 mA, VL = 100 V IF = 0 mA, VL = 200 V Symbol RON RON ROFF ILMT ILMT IO IO Min 6.0 1.5 0.5 300 600 Typ. 11.27 3.15 80 368 736 2.36 79.2 450 920 200 1.0 Max 15 3.75 Unit G mA mA nA A www.vishay.com 2 Document Number 83810 Rev. 1.3, 26-Oct-04 LH1510AAB/ AABTR/ AT Vishay Semiconductors Parameter Output capacitance Pin 4 to 6 Switch offset Test condition IF = 0 mA, VL = 1.0 V IF = 0 mA, VL = 50 V IF = 5.0 mA Symbol CO CO VOS Min Typ. 27.75 10.82 0.17 Max Unit pF pF V Transfer Parameter Capacitance (input-output) Turn-on time Turn-off time Test condition VISO = 1.0 V IF = 5.0 mA, IL = 50 mA IF = 5.0 mA, IL = 50 mA Symbol CIO ton toff Min Typ. 0.72 0.5 0.7 2.0 2.0 Max Unit pF ms ms Typical Characteristics (Tamb = 25 C unless otherwise specified) 200 LED Forward Current (mA) 120 100 80 60 40 20 0 0 iLH1510AT_02 160 Load Current (mA) 120 80 IFon = 5.0 to 20 mA IFon =2.0 mA IFon =3.0 mA IFon =2.0 mA T=85C T=25C T=-40C 40 0 -40 -20 0 20 40 60 80 iLH1510AT_00 Ambient Temperature (C) 0.5 1 1.5 LED Forward Voltage (V) 2 Figure 1. Recommended Operating Conditions Figure 3. LED Forward Current vs. LED Forward Voltage 1.6 LED Forward Voltage (V) 10 LED Reverse current (A) 1.5 1.4 1.3 1.2 IF=1mA 1.1 IF=2mA IF=5mA 1 -40 -20 IF=50mA IF=20mA IF=10mA 8 T=-40C T=25C T=85C 6 4 2 0 20 40 60 80 iLH1510AT_03 0 0 16 32 48 64 80 iLH1510AT_01 Temperature (C) LED Reverse Voltage (V) Figure 2. LED Voltage vs. Temperature Figure 4. LED Reverse Current vs. LED Reverse Voltage Document Number 83810 Rev. 1.3, 26-Oct-04 www.vishay.com 3 LH1510AAB/ AABTR/ AT Vishay Semiconductors 7 6 DC Load Currentt (mA) 1000 800 600 400 T=-40C T=25C T=85C Load Voltage (V) 5 4 3 2 1 0 0 1 2 T=85C T=25C T=-40C 200 0 3 4 5 0 1 2 3 4 5 iLH1510AT_04 LED Current (mA) iLH1510AT_07 Load Voltage (V) Figure 5. LED Current vs. Load Voltage Figure 8. DC Load Current vs. Load Voltage LED Current for Switch Turn-On (%), norm. to 25C 80 60 40 20 0 -20 -40 -60 -40 -20 DC Current Limit (%) change, norm. @25C 45 30 15 0 -15 IF =5 mA T =5 ms VL =4V -20 0 20 40 Temperature (C) 60 80 -30 -4 5 -40 0 iLH1510AT_05 20 40 Temperature (C) 60 80 iLH1510AT_08 Figure 6. LED Current for Switch Turn-on vs. Temperature Figure 9. DC Current Limit vs. Temperature 1.24 LED Dropout Voltage (V) 30 IL=100mA Change in Current Limit (%), norm. to 25C 20 10 0 -10 -20 -30 -40 1.2 1.16 1.12 1.08 1.04 -40 IF =5 mA T =5 ms VL =5V -20 0 20 40 60 80 -20 0 Temperature (C) iLH1510AT_06 iLH1510AT_09 40 20 Temperature (C) 60 80 Figure 7. LED Dropout Voltage vs. Temperature Figure 10. Current Limit vs. Temperature www.vishay.com 4 Document Number 83810 Rev. 1.3, 26-Oct-04 LH1510AAB/ AABTR/ AT Vishay Semiconductors 500 400 300 T=-40C T=25C T=85C 90 75 Capacitance (pF) Load Current (mA) 60 45 30 15 0 200 100 0 iLH1510AT_10 0 1 2 3 4 5 iLH1510AT_13 0 20 Load Voltage (V) 40 60 80 Applied Voltage (V) 100 Figure 11. Load Current vs. Load Voltage Figure 14. Switch Terminal Capacitance vs. Applied Voltage 40 Change in On-Resistance (%), norm. to 25C 0.14 0.12 Insertion Loss (dB) 30 20 10 0 -10 -20 -30 -40 -20 0 20 IF=5mA IL=50mA 0.1 0.08 0.06 0.04 R L=600 i 0.02 0 10 2 40 60 80 iLH1510AT_14 iLH1510AT_11 Temperature (C) 10 3 10 4 Frequence (Hz) 10 5 Figure 12. ON-Resistance vs. Temperature Figure 15. Insertion Loss vs. Frequency ac/dc R-on Variation (%), norm. at IF =5mA 10 8 1000.0 Leakage Current (nA) IL=50mA 6 4 2 0 -2 0 4 8 12 LED Current (mA) 16 20 100.0 T=85C T=70C T=50C 10.0 1.0 T=25C 0.1 0 40 80 120 Load Voltage (V) 160 200 iLH1510AT_12 iLH1510AT_15 Figure 13. Variation in ON-Resistance vs. LED Current Figure 16. Leakage Current vs. Applied Voltage Document Number 83810 Rev. 1.3, 26-Oct-04 www.vishay.com 5 LH1510AAB/ AABTR/ AT Vishay Semiconductors 120 100 Isolation (dB) Switch Offset Voltage (V) 3.5 3.0 2.5 2.0 1.5 1.0 0.5 10 4 10 5 10 6 iLH1510AT_19 IF = 5.0 mA 80 60 40 20 0 10 3 VP=10V RL=50 i 0 20 30 40 50 60 70 80 90 iLH1510AT_16 Frequency (Hz) Ambient Temperature (C) Figure 17. Output Isolation Figure 20. Switch Offset Voltage vs. Temperature 50 Switch Offset Voltage (V) 0.6 T=-40C T=25C T=85C 0.5 0.4 0.3 0.2 0.1 0 0 50 100 150 200 250 300 iLH1510AT_20 Load Current (A) 40 30 20 10 IF=0mA IL<51uA 0 iLH1510AT_17 0 5 10 15 20 25 Load Voltage (V) LED Forward Current (mA) Figure 18. Switch Breakdown Voltage vs. Load Current Figure 21. Switch Offset Voltage vs. LED Current Change in Breakdown Voltage (%), norm. to 25C 9 6 3 0 -3 -6 -9 -40 IF=0mA IL<51uA -20 0 20 40 60 80 Change in Turn-On Time (%), norm. to 25C 24 16 8 0 -8 IF=5mA IL=50mA -20 20 40 0 Temperature (C) 60 80 -16 -24 -40 iLH1510AT_18 Temperature (C) iLH1510AT_21 Figure 19. Switch Breakdown Voltage vs. Temperature Figure 22. Turn-on Time vs. Temperature www.vishay.com 6 Document Number 83810 Rev. 1.3, 26-Oct-04 LH1510AAB/ AABTR/ AT Vishay Semiconductors 30 Change in Turn-Off Time (%), norm. to 25C 20 10 0 -10 -20 -30 -40 IF=5mA IL=50mA -20 0 20 40 60 80 iLH1510AT_22 Temperature (C) Figure 23. Turn-off Time vs. Temperature 1.8 Turn-On Time (ms) 1.4 T=85C 1.0 T=25C 0.6 IL=50mA 0.2 0 10 20 30 40 50 LED Forward Current (mA) T=-40C iLH1510AT_23 Figure 24. Turn-on Time vs. LED Current 1.0 0.9 Turn-Off Time (ms) T=-40C 0.8 T=25C 0.7 0.6 0.5 0.4 0 10 20 30 40 50 LED Forward Current (mA) T=85C IL=50mA iLH1510AT_24 Figure 25. Turn-off Time vs. LED Current Document Number 83810 Rev. 1.3, 26-Oct-04 www.vishay.com 7 LH1510AAB/ AABTR/ AT Vishay Semiconductors Package Dimensions in Inches (mm) DIP Pin One ID. 3 .256 (6.50) .248 (6.30) 4 5 6 2 1 ISO Method A .343 (8.70) .335 (8.50) .039 (1.00) Min. 4 Typ. .020 (.051) Min. .022 (0.55) .018 (0.45) i178001 .300 (7.62) Typ. .150 (3.81) .130 (3.30) 18 Typ. .035 (0.90) .031 (0.80) .100 (2.54) Typ. .014 (.35) .010 (.25) .347 (8.82) .300 (7.62) .150 (3.81) .110 (2.79) Package Dimensions in Inches (mm) SMD .343 (8.71) .335 (8.51) Pin one I.D. .030 (.76) .256 (6.50) .248 (6.30) .100 (2.54) R .010 (.25) .070 (1.78) .315 (8.00) min .435 (11.05) .060 (1.52) .050 (1.27) typ. ISO Method A .039 (0.99) min. .052 (1.33) .048 (1.22) .150 (3.81) .130 (3.30) .0098 (.25) .0040 (.10) .040 (1.016) .020 (0.508) .395 (10.03) .375 (9.63) .300 (7.62) typ. 3 to 7 18 .012 (0.31) .008 (0.20) 4 .100 (2.54) i178002 .315 (8.00) min. www.vishay.com 8 Document Number 83810 Rev. 1.3, 26-Oct-04 LH1510AAB/ AABTR/ AT Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423 Document Number 83810 Rev. 1.3, 26-Oct-04 www.vishay.com 9 |
Price & Availability of LH1510AT
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |